Filling machine for aggressive liquids

The aggressive liquid dosage and filling unit is made of the high molecular weight polypropylene; its capacity is 800 - 2000 bottles per hour


Read More...

Highly Chemical Resistant Fittings and Pumps

The products are intended for use with aggressive and neutral liquids and gases in the following industries: basic chemicals, chemical processing,   pharmaceuticals, cosmetics, maize processing, dairy processing, non-alchocolic beverages, alcoholic beverages, celulosis and paper, textile, energy and chemical treatment of water, waste water purification, watersupply, paints and varnishes,  detergents and washing agentse ...


Read More...

Stable fire-fighting systems

Above-ground hydrant, Foam pot, Roof cooling nozzles, Water curtain nozzle, Foam diverters, Spray water nozzles, Stable nozzles for heavy air foam, Electromagnetic diaphragm valves


Read More...

Separators

Polyethylene separators Euro - norm EN 858, for underground installation, with integrated sludge separator, with safety float against the spilling of mineral oil calibrated for fluid density 0.85 to 0.95 g/cm3, with coalescent filter that allows the residual oil content to be lower than 5 mg/l which is maximum allowed according to DIN EN 858.


Read More...

Three-piece ball valves

Simple construction and operation, a small installation space compared to the other valves, fast opening and closing by rotating the handle in 90°, a circular cross section with a full or narrow passage, a very small hydraulic resistance because there is no turning of flow line of the fluid, baukasten principle of building - easy maintenance and reduced cost of stocking spare parts, various material combinations offer the possibility of wide area of application.


Read More...

Chemical centrifugal pumps

The pumps are primarily intended for transmission of bases, acids, salt solutions and all other aggressive liquids the main pump material is resistant to. They can also be used for non-aggressive liquids (organic compounds, water and other)


Read More...

Two-piece ball valves

Two-piece ball valves with thread fit for nominal pressure PN 16, 25, 40 and 63, and at the request of the customer we produce PN 100 i 160 as well as Class 150, 300, 600, 800, 900, 1500. Operating temperature is limited by applying teflon (PTFE) as a sealing material up to max. 200°C. The area of application is very broad, so it includes their application and installation in the lines with non-aggressive and aggressive fluids in consultation with the manufacturer.


Read More...

Regulators without auxiliary energy

Regulator without auxiliary energy or pressure reducing valve for steam, water and gases, is applied in lines and plants under pressure to reduce the pressure of fluid flow. Pressure reducing valves can be used as individual, standalone components or as part of pressure reducing stations.


Read More...

Control valves

Materials: W.Nr.1.0619; W.Nr.1.4581; W.Nr.1.4408. Nominal pressures: DIN PN 16, 25, 40, 63, 100, 160. ANSI Class 150, 300, 600, 900. Nominal sizes: DN 15 - 300. Application: the processing industry for all aggressive and non-aggressive fluids up to 400º C.


Read More...
012345678

FUNCTION: Prevents entry of dirt from the tank into the suction part of the pipeline, which protects the pump. Width of suction grooves is 1-2 mm.

NOMINAL SIZES: DN 15-100.

NOMINAL PRESSURES: PN 10.

MATERIALS:
basic: PVC, PEHD, PP, PVDF, PTFE.

APPLICATION TEMPERATURE: PVC: 0°C to 50°C, PEHD: -20° to 60°C, PP: -20° to 80°C, PVDF: -40° to 120°C, PTFE: -50° to 150°C.

PIPELINE CONNECTION: flange, connector with thread G, M, NPT; connector for welding and sticking; connector for butt welding.

STANDARD:
Built-in measures: EN 558-1
Connecting measures: ISO 7005 / EN 1092 / DIN 2501 PN 10 /
On special request: JIS, ANSI, GOST.

 

Suction strainers

No.PART NAMEMATERIAL
1 Strainer PVC/PEHD/PP/PVDF/PTFE
2 Nut PVC/PEHD/PP/PVDF/PTFE
3 Body Connector PVC/PEHD/PP/PVDF/PTFE
4 Flange PVC/PEHD/PP/PVDF/PTFE
 
DN 15 20 25 32 40 50 65 80 100
Ødo 15 20 25 32 40 50 58 68 90
L 160 180 180 190 190 225 250 300 350
ØA 47 57 64 78 89 109 150 150 170

Suction strainers with flange

DN 15 20 25 32 40 50 65 80 100
ØD 95 105 115 140 150 165 185 200 220
ØK 65 75 85 100 110 125 145 160 180
f 14 16 16 18 18 20 20 22 25
Øe 14 14 14 18 18 18 18 18 18
n 4 4 4 4 4 4 4 8 8
 

Suction strainers for welding

DN 15 20 25 32 40 50 65 80 100
Ødz 20 25 32 40 50 63 75 90 110
Iz 16 19 22 26 31 38 44 51 61
 

Suction strainers with thread

DN 15 20 25 32 40 50 65 80 100
Dn 1/2 3/4 1 5/4 6/4 2 2 1/2 3 4
In 15 17 20 22 25 28 32 35 45
 

Suction strainers for butt welding

DN 15 20 25 32 40 50 65 80 100
S1 2.5 2.7 3 3.6 4.6 5.8 6.9 8.2 10
ØC 20 25 32 40 50 63 75 90 110
 
KB Armature Logo
KB Armature
Radnička 5, 11030 Belgrade, Republic of Serbia
Tel: +381 11 3557 541 Fax: +381 11 3550 097
office@kbarmature.rs