Filling machine for aggressive liquids

The aggressive liquid dosage and filling unit is made of the high molecular weight polypropylene; its capacity is 800 - 2000 bottles per hour


Read More...

Highly Chemical Resistant Fittings and Pumps

The products are intended for use with aggressive and neutral liquids and gases in the following industries: basic chemicals, chemical processing,   pharmaceuticals, cosmetics, maize processing, dairy processing, non-alchocolic beverages, alcoholic beverages, celulosis and paper, textile, energy and chemical treatment of water, waste water purification, watersupply, paints and varnishes,  detergents and washing agentse ...


Read More...

Stable fire-fighting systems

Above-ground hydrant, Foam pot, Roof cooling nozzles, Water curtain nozzle, Foam diverters, Spray water nozzles, Stable nozzles for heavy air foam, Electromagnetic diaphragm valves


Read More...

Separators

Polyethylene separators Euro - norm EN 858, for underground installation, with integrated sludge separator, with safety float against the spilling of mineral oil calibrated for fluid density 0.85 to 0.95 g/cm3, with coalescent filter that allows the residual oil content to be lower than 5 mg/l which is maximum allowed according to DIN EN 858.


Read More...

Three-piece ball valves

Simple construction and operation, a small installation space compared to the other valves, fast opening and closing by rotating the handle in 90°, a circular cross section with a full or narrow passage, a very small hydraulic resistance because there is no turning of flow line of the fluid, baukasten principle of building - easy maintenance and reduced cost of stocking spare parts, various material combinations offer the possibility of wide area of application.


Read More...

Chemical centrifugal pumps

The pumps are primarily intended for transmission of bases, acids, salt solutions and all other aggressive liquids the main pump material is resistant to. They can also be used for non-aggressive liquids (organic compounds, water and other)


Read More...

Two-piece ball valves

Two-piece ball valves with thread fit for nominal pressure PN 16, 25, 40 and 63, and at the request of the customer we produce PN 100 i 160 as well as Class 150, 300, 600, 800, 900, 1500. Operating temperature is limited by applying teflon (PTFE) as a sealing material up to max. 200°C. The area of application is very broad, so it includes their application and installation in the lines with non-aggressive and aggressive fluids in consultation with the manufacturer.


Read More...

Regulators without auxiliary energy

Regulator without auxiliary energy or pressure reducing valve for steam, water and gases, is applied in lines and plants under pressure to reduce the pressure of fluid flow. Pressure reducing valves can be used as individual, standalone components or as part of pressure reducing stations.


Read More...

Control valves

Materials: W.Nr.1.0619; W.Nr.1.4581; W.Nr.1.4408. Nominal pressures: DIN PN 16, 25, 40, 63, 100, 160. ANSI Class 150, 300, 600, 900. Nominal sizes: DN 15 - 300. Application: the processing industry for all aggressive and non-aggressive fluids up to 400º C.


Read More...
012345678

Filling machines

Use: Aggressive liquids dosage and filling.

Capacity: 800 – 2000 bottles/h

Bottle: 0.2 - 2 litres

Material: High molecular weight polypropylene

Seal: EPDM, NBR, FPM

Valve seat: PTFE (Teflon)

Installed power of electric motor: 0.18 KW

Attest: Certificate of implemented occupational safety measures No: 21-100/Z , issued by the Occupational Safety and Environmental Protection Institute – Belgrade

Warranty period: 3 years

Operation description

A filling machine tank is filled by the gravity flow of liquid from the main tank. Acceptable level is maintained by a float which operates as a non-return valve stop. Dosage containers are filled and drained through a dosage valve. Filling dose is adjusted by a small pipe moving in a dosage container. Valves are actuated by cams. Circular plate is driven by a transmission gear of an electric motor. Pulleys or frequency regulators control the plate speed. The filling machine is equipped with a fan for vapour extraction from the filling area.

KB Armature Logo
KB Armature
Radnička 5, 11030 Belgrade, Republic of Serbia
Tel: +381 11 3557 541 Fax: +381 11 3550 097
info@kbarmature.rs
designed by Ivan Neđić