Filling machine for aggressive liquids

The aggressive liquid dosage and filling unit is made of the high molecular weight polypropylene; its capacity is 800 - 2000 bottles per hour


Read More...

Highly Chemical Resistant Fittings and Pumps

The products are intended for use with aggressive and neutral liquids and gases in the following industries: basic chemicals, chemical processing,   pharmaceuticals, cosmetics, maize processing, dairy processing, non-alchocolic beverages, alcoholic beverages, celulosis and paper, textile, energy and chemical treatment of water, waste water purification, watersupply, paints and varnishes,  detergents and washing agentse ...


Read More...

Stable fire-fighting systems

Above-ground hydrant, Foam pot, Roof cooling nozzles, Water curtain nozzle, Foam diverters, Spray water nozzles, Stable nozzles for heavy air foam, Electromagnetic diaphragm valves


Read More...

Separators

Polyethylene separators Euro - norm EN 858, for underground installation, with integrated sludge separator, with safety float against the spilling of mineral oil calibrated for fluid density 0.85 to 0.95 g/cm3, with coalescent filter that allows the residual oil content to be lower than 5 mg/l which is maximum allowed according to DIN EN 858.


Read More...

Three-piece ball valves

Simple construction and operation, a small installation space compared to the other valves, fast opening and closing by rotating the handle in 90°, a circular cross section with a full or narrow passage, a very small hydraulic resistance because there is no turning of flow line of the fluid, baukasten principle of building - easy maintenance and reduced cost of stocking spare parts, various material combinations offer the possibility of wide area of application.


Read More...

Chemical centrifugal pumps

The pumps are primarily intended for transmission of bases, acids, salt solutions and all other aggressive liquids the main pump material is resistant to. They can also be used for non-aggressive liquids (organic compounds, water and other)


Read More...

Two-piece ball valves

Two-piece ball valves with thread fit for nominal pressure PN 16, 25, 40 and 63, and at the request of the customer we produce PN 100 i 160 as well as Class 150, 300, 600, 800, 900, 1500. Operating temperature is limited by applying teflon (PTFE) as a sealing material up to max. 200°C. The area of application is very broad, so it includes their application and installation in the lines with non-aggressive and aggressive fluids in consultation with the manufacturer.


Read More...

Regulators without auxiliary energy

Regulator without auxiliary energy or pressure reducing valve for steam, water and gases, is applied in lines and plants under pressure to reduce the pressure of fluid flow. Pressure reducing valves can be used as individual, standalone components or as part of pressure reducing stations.


Read More...

Control valves

Materials: W.Nr.1.0619; W.Nr.1.4581; W.Nr.1.4408. Nominal pressures: DIN PN 16, 25, 40, 63, 100, 160. ANSI Class 150, 300, 600, 900. Nominal sizes: DN 15 - 300. Application: the processing industry for all aggressive and non-aggressive fluids up to 400º C.


Read More...
012345678

Three-way ball valves with safety block

Three-way ball valves with safety block

FUNCTION: It is used as distribution and shut-off part in pipeline. Safety block allows separation of connectors behind the valve while the valve is still in shut-off function.

NOMINAL SIZES: DN 15-100.

PRESSURE CALIBRATION: PN 10.

MATERIALS:
basic: PVC, PEHD, PP, PVDF, PTFE,
seats: PTFE,
gaskets: EPDM, FPM - viton.

APPLICATION TEMPERATURES: PVC: 0°C to 50°C, PEHD: -20° to 60°C, PP: -20° to 80°C, PVDF: -40° to 120°C, PTFE: -50° to 150°C.

PIPELINE CONNECTION: flange, connector with thread G, M, NPT; connector for welding and sticking; connector for butt welding.

STANDARD:
Built-in measures: EN 558-1
Connecting measures: ISO 7005 / EN 1092 / DIN 2501 PN 10 /
On special request: JIS, ANSI, GOST.

 

Three-way ball valves with safety block - parts

No.PART NAMEMATERIAL
1 Body PVC/PEHD/PP/PVDF/PTFE
2 Screw Ring PVC/PEHD/PP/PVDF/PTFE
3 O - Ring EPDM/FPM
4 Nut PVC/PEHD/PP/PVDF/PTFE
5 O - Ring EPDM/FPM
6 Body Connector PVC/PEHD/PP/PVDF/PTFE
7 Lever PVC/PEHD/PP/PVDF/PTFE
8 Stem PVC/PEHD/PP/PVDF/PTFE
9 O - Ring EPDM/FPM
10 Ball PVC/PEHD/PP/PVDF/PTFE
11 Seat PTFE
 
DN 15 20 25 32 40 50 65 80 100
Ødo 15 20 25 32 40 50 58 68 90
Hmax 75 85 85 95 105 110 125 135 150
F 90 90 100 110 120 140 150 220 220
FLANGE TYPE: TLS-P

Three-way ball valves with safety block with flange

DN 15 20 25 32 40 50 65 80 100
Lp 130 150 160 180 200 230 290 310 350
ØD 95 105 115 140 150 165 185 200 220
ØK 65 75 85 100 110 125 145 160 180
f 16 18 20 20 23 25 25 27 27
Øe 14 14 14 18 18 18 18 18 18
n 4 4 4 4 4 4 4 8 8
Hp 77 93 108 125 151 185 203 226 255
 
WELDING TYPE: TLS-Z

Three-way ball valves with safety block for welding

DN 15 20 25 32 40 50 65 80 100
Ødz 20 25 32 40 50 63 75 90 110
Lz 102 120 131 150 163 197 239 288 371
Iz 16 19 22 26 31 38 44 51 61
Hz 77 93 108 125 151 185 203 226 255
 
THREAD TYPE: TLS-N

Three-way ball valves with safety block with thread

DN 15 20 25 32 40 50 65 80 100
Dn 1/2 3/4 1 5/4 6/4 2 2 1/2 3 4
Ln 97 118 136 149 170 187 215 264 360
In 15 17 20 22 25 28 32 35 45
Hn 77 93 108 125 151 185 203 226 255
 
BUTT WELDING TYPE: TLS-S

Three-way ball valves with safety block for butt welding

DN 15 20 25 32 40 50 65 80 100
S1 2.5 2.7 3 3.6 4.6 5.8 6.9 8.2 10
LS 119 140 150 171 191 220 230 322 369
Øc 20 25 32 40 50 63 75 90 110
Hc 77 93 108 125 151 185 203 226 255
 

Plastic products

Steel products

ISOQAR

Download

Download

Material is under preparation

​

Reference

Reference
Reference-15.jpg

Questionnaire

Questionnaire

​

KB Armature Logo
KB Armature
Radnička 5, 11030 Belgrade, Republic of Serbia
Tel: +381 11 3557 541 Fax: +381 11 3550 097
office@kbarmature.rs
© 2024 KB Armature. All Rights Reserved