Globe valves - KB Armature

Filling machine for aggressive liquids

The aggressive liquid dosage and filling unit is made of the high molecular weight polypropylene; its capacity is 800 - 2000 bottles per hour

Read More...

Highly Chemical Resistant Fittings and Pumps

The products are intended for use with aggressive and neutral liquids and gases in the following industries: basic chemicals, chemical processing, pharmaceuticals, cosmetics, maize processing, dairy processing, non-alchocolic beverages, alcoholic beverages, celulosis and paper, textile, energy and chemical treatment of water, waste water purification, watersupply, paints and varnishes, detergents and washing agentse ...

Read More...

Stable fire-fighting systems

Above-ground hydrant, Foam pot, Roof cooling nozzles, Water curtain nozzle, Foam diverters, Spray water nozzles, Stable nozzles for heavy air foam, Electromagnetic diaphragm valves

Read More...

Separators

Polyethylene separators Euro - norm EN 858, for underground installation, with integrated sludge separator, with safety float against the spilling of mineral oil calibrated for fluid density 0.85 to 0.95 g/cm³, with coalescent filter that allows the residual oil content to be lower than 5 mg/l which is maximum allowed according to DIN EN 858.

Read More...

Three-piece ball valves

Simple construction and operation, a small installation space compared to the other valves, fast opening and closing by rotating the handle in 90°, a circular cross section with a full or narrow passage, a very small hydraulic resistance because there is no turning of flow line of the fluid, baukasten principle of building - easy maintenance and reduced cost of stocking spare parts, various material combinations offer the possibility of wide area of application.

Read More...

Chemical centrifugal pumps

The pumps are primarily intended for transmission of bases, acids, salt solutions and all other aggressive liquids the main pump material is resistant to. They can also be used for non-aggressive liquids (organic compounds, water and other)

Read More...

Two-piece ball valves

Two-piece ball valves with thread fit for nominal pressure PN 16, 25, 40 and 63, and at the request of the customer we produce PN 100 i 160 as well as Class 150, 300, 600, 800, 900, 1500. Operating temperature is limited by applying teflon (PTFE) as a sealing material up to max. 200°C. The area of application is very broad, so it includes their application and installation in the lines with non-aggressive and aggressive fluids in consultation with the manufacturer.

Read More...

Regulators without auxiliary energy

Regulator without auxiliary energy or pressure reducing valve for steam, water and gases, is applied in lines and plants under pressure to reduce the pressure of fluid flow. Pressure reducing valves can be used as individual, standalone components or as part of pressure reducing stations.

Read More...

Control valves

Materials: W.Nr.1.0619; W.Nr.1.4581; W.Nr.1.4408. Nominal pressures: DIN PN 16, 25, 40, 63, 100, 160. ANSI Class 150, 300, 600, 900. Nominal sizes: DN 15 - 300. Application: the processing industry for all aggressive and non-aggressive fluids up to 400º C.

Read More...

012345678

FUNCTION: It is used as shut-off part. Closing of the valve is done by making contact between cone and seat.

NOMINAL SIZES: DN 15-100.

NOMINAL PRESSURES: PN 10.

MATERIALS:
basic: PVC, PEHD, PP, PVDF, PTFE,
seats: PTFE,
gaskets: EPDM, FPM - viton.

APPLICATION TEMPERATURE: PVC: 0°C to 50°C, PEHD: -20° to 60°C, PP: -20° to 80°C, PVDF: -40° to 120°C, PTFE: -50° to 150°C.

PIPELINE CONNECTION: flange, connector with thread G, M, NPT; connector for welding and sticking; connector for butt welding.

STANDARD:
Built-in measures: EN 558-1
Connecting measures: ISO 7005 / EN 1092 / DIN 2501 PN 10 /
On special request: JIS, ANSI, GOST.

Globe valves

No.	PART NAME	MATERIAL
1	Body	PVC/PEHD/PP/PVDF/PTFE
2	Nut	PVC/PEHD/PP/PVDF/PTFE
3	Flange	PVC/PEHD/PP/PVDF/PTFE
4	O - Ring	EPDM/FPM
5	Valve plug	PVC/PEHD/PP/PVDF/PTFE
6	Hand wheel	PVC/PEHD/PP/PVDF/PTFE
7	Cap	PVC/PEHD/PP/PVDF/PTFE
8	Stem	PVC/PEHD/PP/PVDF/PTFE
9	Cover	PVC/PEHD/PP/PVDF/PTFE
10	Body Connector	PVC/PEHD/PP/PVDF/PTFE

DN	15	20	25	32	40	50	65	80	110
Ødo	15	20	25	32	40	50	58	68	90
Hmax	130	140	160	165	245	260	290	330	390
ØR	65	65	90	90	135	135	200	200	250

FLANGE TYPE: RZV-P

DN	15	20	25	32	40	50	65	80	110
Lp	130	150	160	180	200	230	290	310	350
ØD	95	105	115	140	150	165	185	200	220
ØK	65	75	85	100	110	125	145	160	180
f	18	20	20	20	20	22	24	24	27
Øe	14	14	14	18	18	18	18	18	18
n	4	4	4	4	4	4	4	8	8

WELDING TYPE: RZV-Z

DN	15	20	25	32	40	50	65	80	110
Ødz	20	25	32	40	50	63	75	90	110
Lz	102	120	131	150	163	197	239	288	371
Iz	16	19	22	26	31	38	44	51	61

THREAD TYPE: RZV-N

DN	15	20	25	32	40	50	65	80	110
Dn	1/2	3/4	1	5/4	6/4	2	2 1/2	3	4
Ln	97	118	136	149	170	187	215	264	360
In	15	17	20	22	25	28	32	35	45

BUTT WELDING TYPE: RZV-S

DN	15	20	25	32	40	50	65	80	110
S1	2.5	2.7	3	3.6	4.6	5.8	6.9	8.2	10
LS	119	140	150	171	191	220	230	322	369
Øin	20	25	32	40	50	63	75	90	110

Plastic products

Steel products

KB Armature
Radnička 5, 11030 Belgrade, Republic of Serbia
Tel: +381 11 3557 541 Fax: +381 11 3550 097
office@kbarmature.rs

© 2025 KB Armature. All Rights Reserved